Dell Inspiron 15z 1570 Service Manual - Page 41

Entering the Service Tag in the BIOS

Get Dell Inspiron 15z 1570 PDF manuals and user guides View all Dell Inspiron 15z 1570 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

10. Replace the coin-cell battery (see Replacing the Coin-Cell Battery). 11. Replace the Mini-Card (see Replacing the Mini-Card). 12. Connect the USB/audio cable under the module cover that is connected to the system board and USB/audio board. 13. Replace the memory module(s) (see Replacing the Memory Module(s)). 14. Replace the module cover (see Replacing the Module Cover). 15. Replace the optical drive (see Replacing the Optical Drive). 16. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 17. Turn on the computer. NOTE: After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board. 18. Enter the service tag (see Entering the Service Tag in the BIOS). Entering the Service Tag in the BIOS 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly. 2. Turn on the computer. 3. Press during POST to enter the system setup program. 4. Navigate to the security tab and enter the service tag in the Set Service Tag field. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
10.
Replace the coin-cell battery (see
Replacing the Coin
-
Cell Battery
).
11.
Replace the Mini-Card (see
Replacing the Mini
-
Card
).
12.
Connect the USB/audio cable under the module cover that is connected to the system board and USB/audio board.
13.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
14.
Replace the module cover (see
Replacing the Module Cover
).
15.
Replace the optical drive (see
Replacing the Optical Drive
).
16.
Replace the battery (see
Replacing the Battery
).
17.
Turn on the computer.
18.
Enter the service tag (see
Entering the Service Tag in the BIOS
).
Entering the Service Tag in the BIOS
1.
Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2.
Turn on the computer.
3.
Press <F2> during POST to enter the system setup program.
4.
Navigate to the security tab and enter the service tag in the
Set Service Tag
field.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTE:
After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board.