Dell Inspiron 3847 Desktop Inspiron 3847 Users Guide - Page 34
Removing the Front I/O Panel, Prerequisites, Procedure, USBF1
View all Dell Inspiron 3847 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removing the Front I/O Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove the computer cover. See "Removing the Computer Cover" on page 12. 2 Remove the front bezel. See "Removing the Front Bezel" on page 19. Procedure CAUTION: When sliding the front I/O panel out of the computer, be extremely careful. Carelessness may result in damage to the cable connectors and the cable routing clips. NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly after you replace the front I/O panel. 1 Disconnect the front I/O panel cables from the system board connectors (AUDF1, USBF1, and USBF3). See "System-Board Components" on page 11. 2 Remove the screw that secures the front I/O panel to the front panel. 34 | Removing the Front I/O Panel