Dell Inspiron One 2305 Service Manual - Page 2

Audio Video Board - touch

Page 2 highlights

Back to Contents Page Audio Video Board Dell™ Inspiron™ One 2305/2310 Service Manual Removing the Audio Video (AV) Board Replacing the Audio Video (AV) Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Audio Video (AV) Board 1. Follow the instructions in Before You Begin. 2. Remove the back cover (see Removing the Back Cover). 3. Follow the instructions from step 2 to step 5 in Removing the Front Stand. 4. Remove the AV board shield (see Removing the Audio Video (AV) Board Shield). 5. Disconnect the AV board cables from the connectors on the AV board. 6. Remove the five screws that secure the AV board to the chassis. 7. Lift the AV board away from the chassis. 1 AV board 2 screws (5) Replacing the Audio Video (AV) Board 1. Follow the instructions in Before You Begin. 2. Align the screw holes on the AV board with the screw holes on the chassis. 3. Replace the five screws that secure the AV board to the chassis. 4. Connect the AV board cables to the connectors on the AV board. 5. Replace the AV board shield (see Replacing the Audio Video (AV) Board Shield). 6. Follow the instructions from step 4 to step 5 in Replacing the Front Stand. 7. Replace the back cover (see Replacing the Back Cover).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

Back to Contents Page
Audio Video Board
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Audio Video (AV) Board
Replacing the Audio Video (AV) Board
Removing the Audio Video (AV) Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 2
to
step 5
in
Removing the Front Stand
.
4.
Remove the AV board shield (see
Removing the Audio Video (AV) Board Shield
).
5.
Disconnect the AV board cables from the connectors on the AV board.
6.
Remove the five screws that secure the AV board to the chassis.
7.
Lift the AV board away from the chassis.
Replacing the Audio Video (AV) Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the screw holes on the AV board with the screw holes on the chassis.
3.
Replace the five screws that secure the AV board to the chassis.
4.
Connect the AV board cables to the connectors on the AV board.
5.
Replace the AV board shield (see
Replacing the Audio Video (AV) Board Shield
).
6.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
7.
Replace the back cover (see
Replacing the Back Cover
).
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
AV board
2
screws (5)