Dell Inspiron One 2305 Service Manual - Page 61

excessive force when you install the processor. Be careful not to touch or bend the pins on

Get Dell Inspiron One 2305 PDF manuals and user guides View all Dell Inspiron One 2305 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

d. Place the processor lightly in the processor socket and ensure that the processor is positioned correctly. e. Pivot the processor socket release lever back towards the processor socket, and snap it into place to secure the processor. f. Clean the thermal grease from the bottom of the heat sink. CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. g. Apply the new thermal grease to the top of the processor. Inspiron One 2310 CAUTION: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the processor socket, and do not use excessive force when you install the processor. Be careful not to touch or bend the pins on the system board. CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor. a. Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket. NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket. b. Place the processor lightly in the processor socket and ensure that the processor is positioned properly. 1 ZIF socket 3 processor pin-1 indicator 2 processor 4 ZIF-socket cam screw c. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board. d. Clean the thermal grease from the bottom of the heat sink. CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. e. Apply the new thermal grease to the top of the processor. CAUTION: Ensure that the processor heat sink is correctly seated and secure. 3. Replace the processor heat-sink (see Replacing the Processor Heat Sink). 4. Replace the processor heat-sink fan (see Replacing the Processor Heat-Sink Fan). 5. Replace the MXM-assembly (see Replacing the MXM Assembly). 6. Replace the MXM-assembly fan (see Replacing the MXM-Assembly Fan). 7. Replace the system-board shield (see Replacing the System-Board Shield). 8. Follow the instructions from step 4 to step 5 in Replacing the Front Stand. 9. Replace the back cover (see Replacing the Back Cover).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
d.
Place the processor lightly in the processor socket and ensure that the processor is positioned correctly.
e.
Pivot the processor socket release lever back towards the processor socket, and snap it into place to secure the processor.
f.
Clean the thermal grease from the bottom of the heat sink.
g.
Apply the new thermal grease to the top of the processor.
Inspiron One 2310
a.
Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket.
b.
Place the processor lightly in the processor socket and ensure that the processor is positioned properly.
c.
Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board.
d.
Clean the thermal grease from the bottom of the heat sink.
e.
Apply the new thermal grease to the top of the processor.
3.
Replace the processor heat-sink (see
Replacing the Processor Heat Sink
).
4.
Replace the processor heat-sink fan (see
Replacing the Processor Heat
-
Sink Fan
).
5.
Replace the MXM-assembly (see
Replacing the MXM Assembly
).
6.
Replace the MXM-assembly fan (see
Replacing the MXM
-
Assembly Fan
).
7.
Replace the system-board shield (see
Replacing the System
-
Board Shield
).
8.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
9.
Replace the back cover (see
Replacing the Back Cover
).
CAUTION:
Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION:
Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the processor socket, and do not use
excessive force when you install the processor. Be careful not to touch or bend the pins on the system board.
CAUTION:
You must position the processor correctly in the processor socket to avoid permanent damage to the processor.
NOTE:
The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
1
ZIF socket
2
processor
3
processor pin-1 indicator
4
ZIF-socket cam screw
CAUTION:
Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION:
Ensure that the processor heat sink is correctly seated and secure.