Dell M4300 User's Guide - Page 129
Coin-Cell Battery
View all Dell M4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
1 card 2 card connector 3 cable connector Coin-Cell Battery CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. 1 Follow the procedures in "Before You Begin" on page 107. 2 Remove the hinge cover (see "Hinge Cover" on page 112). 3 Remove the keyboard (see "Keyboard" on page 113). 1 3 2 1 mylar 2 coin-cell battery 3 battery cable connector 4 Remove the battery cable connector from the connector on the system board. 5 Being careful not to break the plastic, slightly raise the corner of the mylar above the battery. 6 While holding the mylar, grasp the battery and pull it out of the battery compartment. Adding and Replacing Parts 127