Dell PowerConnect 5324 Release Notes - Page 12

Port Mirroring PowerConnect 5324 Release Notes Defining Port Mirroring Sessions Add the following restriction: A maximum of 8 ports can be monitored (both Rx and Tx). Protocol Port Modify the field name from VLAN ID (1-4095) to VLAN ID and add to the description (Range: 1-4094). Configuring GVRP Delete: To ensure the correct operation of the GVRP protocol, it is advised to set the maximum number of GVRP VLANs equal to a value which significantly exceeds the sum of: • The number of all static VLANs both currently configured and expected to be configured. • The number of all dynamic VLANs participating in GVRP, both currently configured (initial number of dynamic GVRP VLANs is 128) and expected to be configured. RMON History Control After the field Max No. of Samples to Keep (1-65535) add the following note: Note: A change to the number of sample is only effective after a reboot. Viewing Tables Current The Utilization Summary page contains statistics for interface utilization. New The Utilization Summary page contains statistics for viewing interface utilization. ƒ GVRP Statistics Field Current Leave All Device GVRP Leave all statistics. New Device GVRP Leave All statistics. QoS QoS Overview Under the WRR description, change the following: Current The strict priority queue is emptied before the traffic in the remaining queues in forwarded. New The strict priority (SP) has priority over WRR, and where the traffic is low, WRR shares the bandwidth with SP, occupying the remaining bandwidth according to the calculated ratio. System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 8