Dell PowerConnect 5324 Release Notes - Page 17

PowerConnect 5324 Release Notes Modified Commands in the CLI Reference Guide clock summer-time Under User Guidelines add the following: The following steps must be completed before setting the summer clock: 3. Summer time configuration, for example: console(config)# clock summer-time recurring usa 4. Define Timezone, for example : console(config)# clock timezone 2 zone RADL 5. Set clock, for example: console# clock set 10:00:00 apr 15 2004 sntp anycast client enable Update the command as follows: Field Description Current Guide The sntp anycast client enable Global Configuration mode command enables anycast client. To disable the polling for SNTP broadcast client, use the no form of this command. Change to: The sntp anycast client enable Global Configuration mode command enables anycast client. To disable the SNTP anycast client, use the no form of this command. sntp client enable Update the command as follows: Field User Guidelines Current Guide ♦ Use the sntp client enable Global Configuration mode command to enable broadcast clients globally. Change to: ♦ Use the sntp broadcast client enable Global Configuration mode command to enable broadcast clients globally. bridge address Update the command as follows: Field Syntax Current Guide bridge address mac-address {ethernet interface | port-channel port-channelnumber} [permanent | delete-on-reset | delete-on-timeout | secure] bridge aging time Update the command as follows: Field Syntax parameter Current Guide seconds - Time is number of seconds. (Range: 10 - 630 seconds) Change to: bridge address mac-address [permanent | delete-on-reset | delete-on-timeout | secure] {ethernet interface | port-channel port-channelnumber} Change to: seconds - Time is number of seconds. (Range: 10 - 360 seconds) System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 13