Dell PowerConnect 5324 Release Notes - Page 23

radius-server host PowerConnect 5324 Release Notes Change a parameter description: Syntax Parameter User Guidelines Current Guide ♦ type-Specifies the usage type of the server. Can be one of the following values: login, 802.1x or all. If unspecified, defaults to all. Deleted Commands Change to: ♦ type-Specifies the usage type of the server. Can be one of the following values: login, dot.1x or all. If unspecified, defaults to all. Add: ♦ Up to 4 servers can be defined. The following commands are documented but not supported in this release. • default vlan-disable • show vlan internal usage • ip internal-usage-vlan Modified Text Under the heading Editing Features and sub-heading Terminal Command Buffer. Current Guide The standard number of 10 commands can be increased to 256. Change to: The standard number of 10 commands can be increased to 216. Examples: TAC_PLUS configuration Note for $enab15$ user setup. The following user is needed if a user is allowed to go from level 1 to a level 15. Example. logs into as user lever then goes to a exec user from console. console>enable enter password if console password id enable. console# user = $enab15$ { default service = permit login = cleartext "15" service = exec { priv-lvl = 15 } } End of Release Notes System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 19