Dell PowerConnect W-IAP Remote Configuration Guide - Page 1121

Displaying BGP4 information 30 PowerConnect#show ip bgp peer-group pg1 1 BGP peer-group is pg Description: peer group abc SendCommunity: yes NextHopSelf: yes DefaultOriginate: yes Members: IP Address: 192.168.10.10, AS: 65111 Syntax: show ip bgp peer-group [] Only the parameters that have values different from their defaults are listed. Displaying summary route information To display summary statistics for all the routes in the Layer 3 Switch BGP4 route table, enter a command such as the following at any level of the CLI. PowerConnect#show ip bgp routes summary Total number of BGP routes (NLRIs) Installed : 20 Distinct BGP destination networks : 20 Filtered BGP routes for soft reconfig : 100178 Routes originated by this router : 2 Routes selected as BEST routes : 19 BEST routes not installed in IP forwarding table : 1 Unreachable routes (no IGP route for NEXTHOP) : 1 IBGP routes selected as best routes : 0 EBGP routes selected as best routes : 17 Syntax: show ip bgp routes summary Table 188 lists the field definitions for the command output. TABLE 188 BGP4 summary route information Field Description Total number of BGP routes (NLRIs) The number of BGP4 routes the Layer 3 Switch has installed in the BGP4 Installed route table. Distinct BGP destination networks The number of destination networks the installed routes represent. The BGP4 route table can have multiple routes to the same network. Filtered BGP routes for soft reconfig The number of route updates received from soft-reconfigured neighbors or peer groups that have been filtered out but retained. For information about soft reconfiguration, refer to "Using soft reconfiguration" on page 1091. Routes originated by this router The number of routes in the BGP4 route table that this Layer 3 Switch originated. Routes selected as BEST routes The number of routes in the BGP4 route table that this Layer 3 Switch has selected as the best routes to the destinations. BEST routes not installed in IP forwarding table The number of BGP4 routes that are the best BGP4 routes to their destinations but were not installed in the IP route table because the Layer 3 Switch received better routes from other sources (such as OSPF, RIP, or static IP routes). Unreachable routes (no IGP route for The number of routes in the BGP4 route table whose destinations are NEXTHOP) unreachable because the next hop is unreachable. PowerConnect B-Series FCX Configuration Guide 53-1002266-01 1079