Dell PowerEdge 2600 Installing or Replacing an ERA/O Card - Page 10
Removing an ERA/O Card
View all Dell PowerEdge 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
www.dell.com | support.dell.com Removing an ERA/O Card NOTICE: Do not attempt to disconnect the ERA/O card from the connector on the system board until you have unfastened the card from each of the four support posts. 1 Unfasten each of the support posts from the card: a Compress the clasp at the top of the support post while carefully lifting up on the corner of the card to unseat the post. See Figure 1-7. b Repeat step a for each support post. 2 Lift the ERA/O card straight up and out of the chassis. Figure 1-7. Removing an ERA/O Card ERA/O card system board ERA/O card connector mounting holes (4) support posts (4) 1-8 Installing or Replacing an ERA/O Card
1-8
Installing or Replacing an ERA/O Card
www.dell.com | support.dell.com
Removing an ERA/O Card
NOTICE:
Do not attempt to disconnect the ERA/O card from the connector on the
system board until you have unfastened the card from each of the four support posts.
1
Unfasten each of the support posts from the card:
a
Compress the clasp at the top of the support post while carefully lifting up on the
corner of the card to unseat the post. See Figure 1-7.
b
Repeat step a for each support post.
2
Lift the ERA/O card straight up and out of the chassis.
Figure 1-7.
Removing an ERA/O Card
ERA/O card
connector
ERA/O card
system board
support posts (4)
mounting holes (4)