Dell PowerEdge 2600 Installing or Replacing an ERA/O Card - Page 6
guide toward the system board until the card guide retention clip unhooks
View all Dell PowerEdge 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
www.dell.com | support.dell.com 6 Remove the expansion-card guide: a Press the middle of the expansion-card guide in the direction of the SCSI backplane (away from the system board) and carefully rotate the expansion-card guide toward the system board until the card guide retention clip unhooks from the system board. See Figure 1-3. b Swing the expansion-card guide up and out of the way. Figure 1-3. Removing the Expansion-Card Guide slot retention clip expansion-card guide 1-4 Installing or Replacing an ERA/O Card
1-4
Installing or Replacing an ERA/O Card
www.dell.com | support.dell.com
6
Remove the expansion-card guide:
a
Press the middle of the expansion-card guide in the direction of the SCSI
backplane (away from the system board) and carefully rotate the expansion-card
guide toward the system board until the card guide retention clip unhooks from
the system board. See Figure 1-3.
b
Swing the expansion-card guide up and out of the way.
Figure 1-3.
Removing the Expansion-Card Guide
expansion-card
guide
retention clip
slot