Dell PowerEdge C8000 Dell PowerEdge C8000 Hardware Owner's Manual - Page 113
available Power C States. default, Pause on Errors
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Table 2-1. D4 Token Table (continued) Token 022E 0231 0232 0233 024B 024C 024D 024E 024F 0250 0251 0252 0254 0257 025D 025E 025F Setup Option Description Boot Mode Enables booting to legacy mode, ensures compatibility with operating systems that do not support UEFI. Active Processor Four cores of the processor are enabled This applies to Cores Quad-core processors only. Active Processor Two cores of the processor are enabled. This applies to Cores Quad-core and Dual-core processors. Active Processor Single core of the processor is enabled. This applies to Cores Quad-core and Dual-Core processors. C States When enabled, the processor can operate in all available Power C States. (default) C States When disabled, there are no C states available for the processor. Pause on Errors Enables the BIOS from prompting for F1/F2 on error. BIOS pauses at F1/F2 prompt. Pause on Errors Disables the BIOS from prompting for F1/F2 on error. BIOS pauses at F1/F2 prompt. Quiet Boot Enables the display of the splash or summary screen, rather than the detail of the POST flow. Quiet Boot Disables the display of the splash or summary screen. The user is able to see the detail of the POST messages. N/A The NIC1 is used for PXE boot, followed by NIC2. N/A The NIC2 is used for PXE boot, followed by NIC1. 3F8h/2F8h Sets the back serial port address to 0x3F8 and internal serial port address to 0x2F8 2F8h/3F8h Set back serial port address to 0x2F8 and internal serial port address to 0x3F8. Optimizer Mode Selects optimizer mode as the memory operating mode. Spare Mode Selects spare mode as the memory operating mode. Mirror Mode Selects mirror mode as the memory operating mode. Using the System Setup Program 113