Dell PowerEdge C8000 Dell PowerEdge C8000 Hardware Owner's Manual - Page 65
Redirection After BIOS POST: Always, Enabling and Configuring Console Redirection Via BMC SOL
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5 In the Remote Access Configuration screen, verify the following settings: • Remote Access: Enabled • Serial port number: COM2 as SOL • Serial Port Mode: 115200 8,n,1 • Flow Control: None • Redirection After BIOS POST: Always • Terminal Type: ANSI See "Remote Access Configuration" on page 99 for details. Make sure the host and client are on the same network. 6 Press to return to the System Setup screen. Press again, and a message prompts you to save the changes. Enabling and Configuring Console Redirection Via BMC SOL When using the BMC management port, you have two options for connecting and managing servers: Dedicated-NIC mode and Shared-NIC mode. The following procedures show the setup option of the BMC management port through a Dedicated-NIC or Shared-NIC. To activate console redirection via a dedicated BMC management port, you must configure the following settings: 1 Connect the network cable to the BMC management port. See "Compute Sleds" on page 23 for the location of the BMC management port on the sled. 2 Press immediately after a power-on or reboot to enter System Setup. 3 In the System Setup screen, select the Server menu and press . 4 In the Server screen, select Remote Access Configuration and press . 5 In the Remote Access Configuration screen, verify the following settings: • Remote Access: Enabled • Serial port number: COM2 as SOL • Serial Port Mode: 115200 8,n,1 • Flow Control: None Using the System Setup Program 65