Home » Dell Manuals » Servers » Dell PowerEdge PDU Metered LCD » Manual Viewer

Dell PowerEdge PDU Metered LCD Cabling PowerEdge R520 - Page 1

Dell PowerEdge PDU Metered LCD Manual

View all Dell PowerEdge PDU Metered LCD manuals

Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Cable Routing Procedures for the Dell™ PowerEdge™ R520 System This Dell Technical White Paper explains the best practices for routing and securing the cables exiting the back of the R520 system. Greg Henderson and Jose L. Flores Data Center Infrastructure Engineering May 2012

Section	Page
Introduction	4
Section 1: Cabling a PowerEdge R520 system with a CMA	4
1.1. Connecting the cables to the system	4
1.2. Routing the power cables through the strain reliefs	5
1.3. Installing the CMA	5
1.3.1. Installing the inner CMA attachment bracket	5
1.3.2. Left-side mounting instructions	6
1.3.3. Right-side mounting instructions	7
Section 2: Replacing a hot swap power supply on a PowerEdge R520 system with a CMA	8
2.	8
2.1. Replacing a hot swap power supply with a left-side mounted CMA	8
2.2. Replacing a hot swap power supply with a right-side mounted CMA	8
Section 3: Cabling a PowerEdge R520 system on sliding rails without a CMA	10
3.	10
3.1. Routing the cables	10
3.2. Removing the outer CMA brackets for shallow racks	10

Match case Limit results 1 per page

Greg Henderson and Jose L. Flores

Data Center Infrastructure Engineering

May 2012

Cable Routing Procedures for the

Dell™ PowerEdge™ R520 System

This Dell Technical White Paper explains the best practices for routing

and securing the cables exiting the back of the R520 system.