Dell PowerStore 7000T EMC PowerStore Quick Start Guide - Page 3

Install the base enclosure onto the rails

Get Dell PowerStore 7000T PDF manuals and user guides View all Dell PowerStore 7000T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

3. Install the base enclosure onto the rails The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a mechanical lift and/or help from another person. 1. From the front of the rack, slide the base enclosure onto the rails. Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not easily slide out. 2. (Optional) If securing the system for shipment in the cabinet or for other unstable environments: Locate the captive screw under each latch and tighten to the front of the cabinet using a #1 Phillips screwdriver. Dell EMC PowerStore Quick Start Guide Page 3 of 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Dell EMC PowerStore Quick Start Guide
Page
3
of
8
3.
Install the base enclosure onto the rails
The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal injury
and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a mechanical lift
and/or help from another person.
1.
From the front of the rack, slide the base enclosure onto the rails.
Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not easily slide out
.
2.
(Optional) If securing the system for shipment in the cabinet or for other unstable environments:
Locate the captive screw under each latch and tighten to the front of the cabinet using a #1 Phillips screwdriver.