Dell PowerStore 9000X EMC PowerStore Network Planning Guide - Page 36
Table 13. PowerStore T model Network Setup Preparation Worksheet example continued
View all Dell PowerStore 9000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Table 13. PowerStore T model Network Setup Preparation Worksheet (example) (continued) Step Step details Notes ● Port 1 on Node A, and Port 1 on Node B must connect to opposite switches Record the ToR switch ports required to connect to: Node A, Port 0 to ToR 1 port 1 Node A, Port 1 to ToR 2 port 1 Node B, Port 0 to ToR 2 port 54 Node B, Port 1 to ToR 1 port 54 4. Record the out-of-band management switch ports to connect to: Node A management 1GbE port to OOB port 2 Node B management 1GbE port to OOB port 53 5. Optionally, record the port on the out-of-band (OOB) OOB port 1 management switch port to use for remote discovery. 6. Record the ports on the OOB management switch that will be used to connect to the uplinks. Management Uplink A to port 25 Management Uplink B to port 26 7. Record the VLAN IDs that will be used on the OOB management switch: Remote Discovery (untagged) 100 Management (untagged) 100 8. Record the VLAN IDs that will be used on the Top-of-Rack (ToR) switches: Storage network (tagged) 200 NAS (tagged) 300 Internal (untagged) 1 9. Reserve and record the IP addresses necessary to configure the switch below: Management IP address for out-of-band management switch 100.0.100.50/24 Management IP address for switch 1 100.0.100.10/24 Management IP address for switch 2 100.0.100.11/24 Default gateway 100.0.100.1 NTP server 100.0.100.200 10. Dell EMC supports deploying PowerStore T model with two Top-of-Rack (ToR) switches with a layer 2 interconnect link. Choose which type of layer 2 interconnect you will use: Highly Recommended: Multi-chassis Link Aggregation Group (MC-LAG) If you will be using MC-LAG, record the ports you will use to connect the switches together. Switch to switch port pair 1 Switch to switch port pair 2 Alternative to MC-LAG: Reliable L2 uplinks 11. If using MC-LAG, enter the Domain ID. 12. If using VLT for the Layer 2 interconnect, record the: 25 to 25 26 to 26 N/A VLT domain ID 1 36 PowerStore Network Setup Preparation Worksheets