Dell XPS 8700 Owner's Manual - Page 34
Replacing the mSATA Drive, Procedure, Postrequisites
View all Dell XPS 8700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Replacing the mSATA Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the notch on the mSATA drive with the tab on the system-board connector. 2 Insert the mSATA drive at a 45-degree angle into the system-board connector. 3 Press the other end of the mSATA drive down and replace the screws that secure the mSATA drive to the systemboard. Postrequisites Replace the computer cover. See "Replacing the Computer Cover" on page 16. 34 | Replacing the mSATA Drive