Denon AVR-5805MK2 Owners Manual - Page 4

ENGLISH System Setup SURROUND PARAMETER SYSTEM SETUP ENTER D H F G ENTER SYSTEM SETUP SURROUND PARAMETER D H F G [ON SCREEN] About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit Setting the Video Convert Mode Set whether or not to use the video conversion function. 1 Press D H to select "Video Setup" at the "System Setup Menu", then press ENTER. 2 Press D H to select "Video Convert Mode", then press ENTER. 3 Press D H to select the input source, then press F G to set. ON, OFF: Select "ON" to use the video conversion function, "OFF" if you do not want to use it. 4 Press ENTER. 2 3 System Setup The video conversion function The AVR-5805 is equipped with a function for up and down converting video signals. Because of this, the AVR-5805's MONITOR OUT terminal can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-5805's video input terminals are connected. Generally speaking, analog video connections using the component video terminals offer the highest quality playback, followed by connections using the S-Video terminals, then connections using the regular video terminals (yellow). The flow of the video signals. (HDMI / DVI-D terminals) (HDMI / DVI-D terminals) (Component video terminals) (S-Video terminal) (Component video terminals) (MONITOR OUT ZONE2) (S-Video terminal) (MONITOR OUT ZONE2) (Video terminal) (Video terminal) (MONITOR OUT ZONE2) This unit's input terminals This unit's output terminals • Down-converting from the component video signal to the S-Video and composite video signal is possible only when the resolution of a component video signal is 480i / 576i. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. If this happens, please set the "Video Convert Mode" to "OFF". • When the video conversion function has been used, information such as that of text broadcasts which has been added to the video signal might not be output. If this happens, please set the "Video Convert Mode" to "OFF". : only MAIN ZONE 480i/576i ¢ Cautions on the ZONE2 video conversion function There is no TBC (Time Base Collector) for ZONE2. When the component video terminals are used to connect the AVR5805 with a TV (or monitor, projector, etc.) and the video (yellow) or S-Video terminals are used to connect the AVR-5805 with a VCR, depending on the combination of the TV and VCR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes. If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-5805 and the VCR, or if your VCR has a TBC function, turn it on. 3 ENGLISH