Denon DN-A7100 User Guide - Page 47

GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the DNA7100 is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT Should the operation or display seem to be abnormal, reset the unit with the following procedure. To turn on the DN-A7100, press and hold the CLEAR and KEY-LOCK buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the SOURCE, Surround mode, delay time, TUNER PRESET etc., to their initial settings. TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range 87.5 - 108.0 MHz Usable Sensitivity IHF 1.8 µV/16.4 dBf Signal to Noise Ratio Mono/Stereo 75/70 dB Distortion Mono/Stereo 0.2/0.3 % Stereo Separation 1 kHz 45 dB Alternate Channel Selectivity 300 kHz 60 dB Image Rejection 98 MHz 70 dB Tuner Output Level 1 kHz, ± 75 kHz Dev 800 mV AM TUNER SECTION Frequency Range 531 - 1602 kHz Signal to Noise Ratio 50 dB Usable Sensitivity Loop 400mV/m Distortion 400Hz, 30 % Mod. 0.5 % Selectivity 20 kHz 70 dB AUDIO SECTION Input Sensitivity/Impedance (volume at 0dB) (RCA connectors 220 mV/ 20 kohms (XLR connectors) (+4dBu 440 mV/ 20 kohms (-10dBV 110 mV/ 20 kohms Output Level (volume at 0dB) (+4dBu 300 mVrms typ. (-10dBV 75 mVrms typ. Signal to Noise Ratio(Analog Input / Pure Direct)... 98 dB Frequency Response (Analog Input / Pure Direct) ....... 10 Hz - 90 kHz (± 3 dB) THD 0.03 % Cross Talk 80 dB (at 1kHz) VIDEO Television Format NTSC/PAL Input Level/Impedance 1 Vp-p/75 ohms Output Level/Impedance 1 Vp-p/75 ohms Video Frequency Response ........5 Hz to 8 MHz (- 1 dB) Video Frequency (Component)...5 Hz to 80 MHz (- 1 dB) S/N 60 dB GENERAL Power Requirement AC 230 V 50 Hz Power Consumption 40 W Weight 7.66 Kg ACCESSORIES Remote Control Unit RC-1065 1 AAA-size batteries 2 FM Antenna 1 AM Loop Antenna 1 AC Power Cord 1 Service Station List 1 User guide 1 Specifications subject to change without prior notice. DIMENSIONS 482.6 mm (19 ins.) 8.2 mm (5/16 ins.) 132.6 mm (5-1/4 ins.) 140.8 mm (5-1/2 ins.) 18 mm (3/4 ins.) 324.85 mm (12-3/4 ins.) 353.85 mm (13-7/8 ins.) 11 mm (7/16 ins.) 43 ENGLISH