Denon DN-C640 Operating Instructions - Page 31

ENGLISH 3. DEVICE OPERATION 6. Fade in time (Fade In) This feature allows you to adjust the length of time for the DN-C640's Fade In feature Set value Off (default) 0.5sec - 10.0sec (0.5second step) Fade in Off On Processing Fade in time --- 0.5second - 10.0seconds 7. Fade out time (Fade Out) This feature allows you to adjust the length of time for the DN-C640's Fade Out feature. Set value Off (default) 0.5sec - 10.0sec (0.5second step) Fade out Off On Processing Fade out time --- 0.5second - 10.0seconds 8. Skip back time (Skip Back) This feature allows you to set the amount of time that the DN-C640 will instantly replay when SKIP BACK is pressed on the unit or IR control. Set value 1.0sec - 30.0sec (Default 10.0sec) (0.5second step) Processing Skip Back time 1.0second - 30.0seconds 9. End monitor time (End Monitor) This feature allows you to set the amount of time at the end of the track that the DN-C640 will play when the END MON button is pressed on the unit or IR control while in standby. In the MP3 play mode, the time of monitor may not be correctly. Set value 5sec - 35sec (Default 10sec) (5seconds step) Processing End Monitor time 5seconds - 35seconds 10. End of message time (EndOfMessage) This feature allows you to set the amount of time at the end of the track where the End of Message will be displayed. When less then the user selected time is left at the end of the currently playing track, the time display will begin to flash until the track has completed. Set value Off 0/ 5 /10 /15 /20 /30 /60sec (Default 10sec) End of Message Off On Processing End of Message time --- 0/ 5 /10 /15 /20 /30 /60seconds 11. Next track reserve (NextTrReserve) This feature allows you to decide what the DN-C640 will do at the end of a track Finish mode setting is "Stop" Set value On (default) Off Processing at the end of track (Reserved a next track): Cue at the playback stating position of index 01 of reserved track (Not reserved a next track): Stop Stop 23