Denon DNS1200 Owners Manual - Page 25

Getting Started Connections Playback Basic Operations Memo Function Utility Specifications Filter Parameter Setting 1 o Press the FILTER button. When the FILTER button is pressed, the FILTER button lights and the parameters setting screen is displayed. b When filter indicator is solid (not blinking), press the FILTER button to set the filter parameter selection mode again. 2 Q0 Use the FILTER button or scratch disc to set the filter parameters. The FILTER button and PARAMETERS button flash while the parameters are being set. b The Feedback Level can be set with the Scratch disc, while the Echo Delay Time can be set with the PARAMETERS knob. 3 Q1 Press the PARAMETERS knob or the JOG MODE button to turn off the parameters setting screen. Platter Effects Brake Operating Time Setting This simulates a turntable gradually slowing and stopping playback. 1 Q3 Press the BRAKE button. When the BRAKE button is pressed, the brake mode is turned on, and the BRAKE button and PARAMETERS button flash for about 3 seconds to indicate the brake operating time. 2 Q4 Turn the PARAMETERS knob to set the brake operating time. The operating time is set and the operating time setting mode is canceled. b If no operation is performed for about 3 seconds after the first time the BRAKE button is pressed or the adjustment is performed with the PARAMETERS knob, selection of the brake operating time is canceled automatically. 4 Q2 Press the FILTER button while the filter settings screen is displayed. Turning the filter off. Operating the Brake 1 During playback, press the 1 3 button. 2 To cancel brake operation, press the 1 3 button again during brake operation. Brake operation is canceled. n Turning the brake mode off Q5 Press the BRAKE button while the brake is operating. The brake mode turns off. 20