Denon DNV210 User Guide - Page 33
When AUDIO SETUP is selected
UPC - 081757507912
View all Denon DNV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH When "AUDIO SETUP" is selected 2,3 1 TOP MENU /PBC MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 Set the "AUDIO SETUP" in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. DIGITAL OUTPUT Use this to select the digital output's signal format. 96k LPCM OUT Use this to set the digital audio output when playing DVDs recorded in linear PCM audio. 2 DYNAMIC RANGE This has the effect of reducing the size difference between audio outputs. Even if the audio output is set to MIN, you can still hear audio or conversations. NOTE: • Dynamic range is displayed when the "SETUP MENU MODE" at "SYSTEM SETUP" is set to "EXPERT". Press the ENTER button to decide the menu item. q When "DIGITAL OUTPUT" is selected: Use the 5 and ∞ cursor buttons to select the output format, press the ENTER button to decide. NORMAL When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM, linear PCM signals are 3 output. Select "NORMAL" when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder. PCM (Factory default) When playing Dolby Digital bitstream signals or DVDs recorded in linear PCM, the signals are converted into 48 kHz/16-bit PCM (2- channel) signals and output from the digital outputs. When playing DVDs recorded in PCM, linear PCM signals are output. OFF Digital audio is not output. Remote control unit AUDIO SETUP DIGITAL OUTPUT 96K LPCM OUT DYNAMIC RANGE PCM 96k MAX SELECT: SET DIGITAL OUT SET: ENTER BUTTON ENTER Remote control unit Remote control unit q AUDIO SETUP DIGITAL OUTPUT 96K LPCM OUT DYNAMIC RANGE PCM 96k MAX SELECT: SET DIGITAL OUT SET: ENTER BUTTON 26