Denon DRA 397 Owners Manual - English - Page 15
Dimmer], Status, Pure Direct, Select, Tone Defeat, Ch Vol, Tone Control, Loudness, Video Select], - display off
UPC - 081757507349
View all Denon DRA 397 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Operation Checking the currently playing program source, etc. Press STATUS. • The current program source and various settings are indicated on the display. ¢ When you do not want to adjust the tone Press to select "TONE DEFEAT ON". ¢ When listening with the volume turned low Switching the brightness of the display Press to select "LOUDNESS ON". Press [DIMMER]. The brightness of the display can be adjusted in three steps. The display can also be turned off. Adjusting the speaker volume 1 Press to select the speaker. The settable speaker switches each time this button is pressed. Selecting the play mode (PURE DIRECT) This mode reproduces the sound with extremely high quality. The display that could affect the audio signals are turned "OFF". 2 Use to adjust the volume. Can be adjusted within the range of -12 dB to +12 dB. Press PURE DIRECT. Combining the currently playing sound with the desired image (VIDEO SELECT function) Setting the tone control ¢ Adjusting the tone Press [VIDEO SELECT] until the desired image appears on the display. Listening to the radio Check that the remote control unit is set to "A". Operation Auto preset memory This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. 1 Press and set the DRA-397's power to the standby mode. 2 Hold and press . • The unit automatically begins searching for FM broadcast stations. When the first FM broadcast station is found, that station is stored in the preset memory at channel A1. Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations. Channel A1 is tuned in after the auto preset memory operation is completed. • If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. • To interrupt this function, press . 1 Press to select "BASS" or "TREBLE". 2 Use to set the level. Can be adjusted within the range of -10 dB to +10 dB. ¢ Default settings • To cancel, press [VIDEO SELECT] to select "SOURCE". • The video source selected with the video select function is stored in the memory for the different input sources. A1 ~ A8 B1 ~ B8 C1 ~ C8 D1 ~ D8 E1 ~ E8 F1 ~ F8 G1 ~ G8 Auto tuner presets 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 12 ENGLISH