Dewalt DW0330S Instruction Manual - Page 23

3. Select as the measurement type. • Press to display the Main Menu (Figure E 2 ). • Press to select . • Press to display the Measurement Type Menu (Figure E 3 ). • Press the arrow buttons to select (Figure E 4 ). • Press . 4. View the last measurement that was taken. Press to scroll through all the measurements that have been stored in the tool's memory (up to 20). Press to scroll back. Clearing the Tool's Memory You can clear one or more measurements that are currently in the tool's memory. 4. Specify which measurement you want to E delete: • To delete a specific measurement, continue with step 5. • To delete ALL measurements, skip to step 6. 5. To delete a specific measurement: • Press or to scroll through the measurements that have been stored in the tool's memory (up to 20) until you display the measurement to be deleted. • Press . • Select and press measurement. to delete the 6. To delete ALL measurements: • Press . • Select and press to delete all measurements from the tool's memory. Clearing a Measurement 1. Point the tool's laser (Figure A 1 ) toward a wall or object, and not toward anyone's eyes. 2. Press (Figure A 3 ) to turn the tool on and display the red laser dot. 3. Select as the measurement type. • Press to display the Main Menu (Figure E 2 ). • Press to select . • Press to display the Measurement Type Menu (Figure E 3 ). • Press the arrow buttons to select (Figure E 4 ). • Press . Turning Off the Tool The tool can be turned off in either of these ways: • Press and hold for 10 seconds. When you release after 10 seconds, the tool will turn off. • If you do not use the tool for 90 seconds, it will automatically turn off. Calibrating the tool Please note that if you do not position the tool correctly for each step of the calibration process, will appear in red on the screen (Figure X ). 1. Point the tool's laser (Figure A 1 ) toward a wall or object, and not toward anyone's eyes. 23