Dymo LabelManager® Wireless PnP User Guide 2 - Page 4

TP‐link 300Mbps Ultimate Wireless N Gigabit Router TP‐link TL‐WR2543N Dual Band Router ZyXel 802,11g Wireless ADSL2+ 4‐port Security Gateway P‐662HW Series TL‐WR1043ND TL‐WR2543N P‐662HW‐D3 1 stored configuration One wireless network is automatically stored for automatic recognition. So once the LabelManager Wireless PnP is installed on your network you will not have to do it again unless wanting to use a different network. Power Supply Provided with the machine is a Li‐Polymer rechargeable battery, a USB cable and a wall plug. Battery This is the exact same battery as the LabelManager 500TS SKU 1814308. This battery will be sold on DYMO.com and be available via the contact center. The printer will normally operate using power provided by the internal Li‐Polymer rechargeable battery. Note: On the first batch of printers we can only guarantee optimal wireless print quality when plugged into the wall outlet. The printer will operate when running wirelessly via battery pack but the user may experience print quality issues. Battery life / standby time The machine's current consumption in the OFF state, when inserting a fully loaded battery, after 6 months, still 2/3 of total capacity will be left over. When the battery pack is fully charged, it will be possible to print (5) cassettes (standard PET). If the printer does not respond when plugged in to a USB port the battery may be empty. It will take 5 to 6 hours to fully charge an empty battery again, but after 15 minutes of charging the user will be able to print 1.5 m of tape. Also note that charging of the battery is needed after an extended period of no use. Use case Life WiFi printing with USB charging practically unlimited (charging adapter connected is faster than draining) standalone WiFi printing up to 6 tape cassettes Printer in OFF state 100 days Conditions / remarks 24mm, default fonts, normal text‐label, normal use 24mm, default fonts, normal text‐label, normal use from fully loaded battery to 20% capacity Charging times Use case Charging from USB charging adapter Time 2,5 hrs Conditions / remarks from 20% capacity of battery pack to fully loaded, charging only (printer OFF)