Dymo LabelManager® Wireless PnP User Guide 2 - Page 5

Charging from USB port 10 hrs from 20% capacity of battery pack to fully loaded, not recommended Battery indication An annunciator in the software indicates the load level of the battery pack. Additional information can be found in the Application Software Specification. USB Cable and plug The USB cable and wall plug are specific to the LabelManager WPnP and included in the packaging. These two items will be offered for replacement as a bundle sellable via DYMO.com or available via the contact center. SKU 1881983 1881984 1881985 1881896 Item Name USB Cable & Adapter Bundle EU USB Cable & Adapter Bundle UK/HK USB Cable & Adapter Bundle AUS/NZ USB Cable & Adapter Bundle US EAN Number 3501178819830 3501178819847 3501178819854 3501178819861 The USB cable supplied with the printer is for charging the battery and communication between the computer and the printer. It will not be possible to print when Li‐Ion batteries are empty and the USB cable is connected. Note: Only the USB cable included with the LabelManager Wireless PnP can be used for this product. This is an extra thick USB cable, others will not be sufficient and can cause damage to the printer or danger for the user. USB Cable Specifications Length Type Power section (wire thickness) Data section (wire thickness) EMI suppression Maximum 1,80 meter Standard A to B AWG20 AWG28 ferrite bead on B connector side (printer side) Software features updated in DLS 8.5 and DLL 4.5 DLL DLS Auto cut between labels Font Preview in Font selection DYMO.COM Registration Link Wifi Configuration Wizard Tape Width Indicator Add Network Printer wizard