Dymo LabelWriter® 450 Duo Label Printer User Guide 1 - Page 6

3. Connecting your LabelWriter Printer NOTE Do not connect the printer to your computer until after the software installation is complete. Power adapter To connect the power 1 Plug the power cord into the power adapter. See Figure 3. 2 Plug the power adapter into the power connector on the back of the printer. See Figure 4. Power cord Figure 3 3 Plug the other end of the power cord into a power outlet. 4 Plug the USB cable into the USB port on the back of the printer. 5 When the software is completely installed, connect the other end of USB the USB cable into an available USB port on your computer. Mac OS If the printer is not in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer. Power Figure 4 4