EMC AX100i Release Notes - Page 30

Documentation Documentation The AX100 support website where you accessed these release notes also contains the most up-to-date documents and troubleshooting trees for this product release. The AX100-Series Documentation CD (P/N 053-001-240) that shipped with the storage system also contains documents and troubleshooting trees for this product release; however, they are superceded by those on the AX100 support website. The troubleshooting trees on the AX100 support website are updated frequently. Documentation updates This section contains updates to AX100-series documentation. Online help - AX Navisphere Server Utility Under the "Viewing or Updating Server to SP Connections" section, replace step 3 with the following: The utility automatically scans for all connected AX100-series storage systems and lists them under Connected Storage Systems. Under Virtual Disks on External Storage Systems, the utility lists any virtual disks on the storage system that the server has mounted. The information listed in these sections is listed below. Note: If the Navisphere Server Utility is already running, it will not automatically perform a scan, you must click Rescan. If an AX100-series storage system is connected to the server but it was not discovered, a message displays indicating why the system was not discovered. Correct the problem and click Rescan to attempt to discover the storage system again. Connected Storage Systems HBA/NIC Port - Server's HBA or NIC port ID number. HBA Port WWN - Server's HBA port world wide name or the iSCSI iqn. Storage System - Connected storage system name. SP - SP ID number (SP A or SP B). Port - SP port ID number. SP IP - SP IP address. 30 EMC AX100-Series Integrated Management Software Release Notes