Edimax BR-6208AC User Manual - Page 64
Start IP, End IP, Enable Static DHCP, Leases, MAC Address, IP Address, Clear, Delete Selected,
View all Edimax BR-6208AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Start IP End IP Enter the start IP address for the DHCP server's IP address leases. Enter the end IP address for the DHCP server's IP address leases. Your device's DHCP server can be configured to assign static (fixed) IP addresses to specified network devices, identified by their unique MAC address. Enable Static DHCP Leases MAC Address IP Address Add Clear Delete Selected / Delete All Enable/disable static DHCP leases. This must be enabled in order to assign any network device a static IP address. Enter the specified network device's MAC address here. Assign a fixed IP address for the specified network device here. Add the information to the "Static DHCP Leases Table". Clear the MAC address and IP address fields. Delete selected or all entries from the table. The LAN IP page will be displayed as below when your device is set to access point mode. You can set theBR-6208AC to obtain an IP address automatically or you can specify an IP address. 60