Edimax BR-6208AC User Manual - Page 97
Enable Static Routing, Destination LAN IP, Subnet Mask, Default Gateway, Hop Count, Interface,
View all Edimax BR-6208AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Enable Static Routing Destination LAN IP Subnet Mask Default Gateway Hop Count Interface Add Check/uncheck the box to enable/disable static routing. Enter the destination network's IP address. Enter the subnet mask of the destination network. Enter the default gateway of the destination network. Enter the hop count (the distance between destination network and this broadband router) here. Enter the interface which leads to destination network. Add the route to the current static routing table. Static Routing Table entries will be displayed in the table shown below: Delete Selected/ Delete selected or all entries from the table. Delete All III-3-8-2. Port Forwarding This function allows you to redirect a single port or consecutive ports of an Internet IP address to the same port of a local IP address. The port number(s) of the Internet IP address and local IP address must be the same. If the port number of the Internet IP address and local IP address is different, please use the "Virtual Server" function instead. 93