Edimax BR-6208AC User Manual - Page 93
Local Port Range, Remote IP Address, Remote Port Range, Traffic Type, Protocol, Delete Selected,
View all Edimax BR-6208AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Local Port Range Remote IP Address Remote Port Range Traffic Type Protocol Save Enter the port range to activate the QoS rule. Enter a single port number e.g. 110 or a range of port numbers e.g. 110-120 Enter the remote IP address range which will activate the QoS rule. Enter a starting IP address in the left field and the end IP address in the right field to define a range of IP addresses; or enter an IP address in the left field only to define a single IP address. Enter the remote port range to activate the QoS rule. Enter a single port number e.g. 110 or a range of port numbers e.g. 110-120 Select traffic type as an alternative to specifying a port range above. Select a "TCP" or "UDP" protocol type. Click 'add' button to add a new QoS rule (detailed instructions will be given below). QoS rule entries will be listed in the "Current QoS Table" as shown below. Select a rule using the "Select" checkbox. When using the "Edit" button only one rule can be selected each time. QoS rules will be processed in the order that they are listed i.e. the rule at the top of the list will be applied first, and then the second rule etc. The order can be adjusted using the "Move Up/Down" buttons. Edit Delete Selected/ Delete All Move Up/Down Edit a selected rule. Delete selected or all entries from the table. Move selected rule up or down the list. 89