Edimax BR-6524n Manual - Page 122
Port Range
View all Edimax BR-6524n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
If the service you wish to deny or allow is not listed, you can use 'User Define Service' table to add a new service of your own: Here are descriptions of every setup items: Item Name Protocol Port Range Description Please select the protocol type of this service: TCP or UDP, or 'Both'. Please input the port range if this service. For a single port number, just input the number of service port (like '110'). If this service consists multiple continuous ports, you can input '110-120' for port number 110 to 120, or '110,115,120' for port number 110, 115, and 120. Click 'Add' to add this IP address restriction rule to the list (and back to previous page), or click 'Reset' to clear all texts in every field. When you finished with the settings in this page, you can click 'Apply' button to save changes you made in this page, or you can click 'Cancel' to discard changes. After you click 'Apply' button, you'll see the following messages: