Edimax EW-7416APn V2 Quick Install Guide - Page 13
Turn Wi-Fi
View all Edimax EW-7416APn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Return to your Macintosh's "Network" screen, found under "System Preferences". Click "Ethernet" in the left panel and open the drop down menu labeled "Configure IPv4". Select "Using DHCP" and click on "Apply". 9. Disconnect the access point from your Macintosh by removing the connecting Ethernet cable. The "Ethernet" status in the left sidebar should change to "Not Connected". Select "Wi-Fi" in the left sidebar and click the "Turn Wi-Fi On" button in the right panel. Open the "Network Name" menu and choose your access point (Main ESSID) name from the list. In this case, the network was named "repeater". 13
13
8.
Return to your Macintosh
’
s
“
Network
”
screen, found under
“
System
Preferences
”
. Click
“
Ethernet
”
in the left panel and open the drop down
menu labeled
“
Configure IPv4
”
. Select
“
Using DHCP
”
and click on
“
Apply
”
.
9.
Disconnect the access point from your Macintosh by removing the
connecting Ethernet cable. The
“
Ethernet
”
status in the left sidebar should
change to
“
Not Connected
”
.
Select
“
Wi-Fi
”
in the left sidebar and click the
“
Turn Wi-Fi On
”
button in the
right panel. Open the
“
Network Name
”
menu and choose your access point
(Main ESSID) name from the list. In this case, the network was named
“
repeater
”
.