Edimax HP-5101 Manual - Page 25
Joining a Network
View all Edimax HP-5101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6.2 Joining a Network If you want to add a new powerline adapter to an existing network, follow the following procedures: Step 1 Press the "Group/Reset" button on an adapter in the existing network (adapter A or B) for less than 3 seconds. The Power LED will start to blink. Step 2 Within 120 seconds after the Power LED starts blinking on adapter A or B, press the "Group/Reset" button on the new adapter (adapter C) for at least 3 seconds. Step 3 Wait for the connection to be established. 22
22
6.2 Joining a Network
If you want to add a new powerline adapter to an existing network, follow the
following procedures:
Step 1
Press the “Group/Reset” button on an adapter in the existing network (adapter A
or B) for less than 3 seconds. The Power LED will start to blink.
Step 2
Within 120 seconds after the Power LED starts blinking on adapter A or B, press
the “Group/Reset” button on the new adapter (adapter C) for at least 3 seconds.
Step 3
Wait for the connection to be established.