Edimax IC-3005 Quick Install Guide - Page 8
IP Camera.
 |
View all Edimax IC-3005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Hardware Installation 1. Unpack your Edimax IP Camera from its packaging and ensure that all the items listed in Chapter 1 are there. 2. Connect the Edimax IP Camera to your network by attaching a network cable from your switch or router to the LAN port on the IP Camera. 3. Connect the power adapter to the IP Camera and plug the adapter into a power outlet. When the IP Camera is ready, the Blue LED will light up. Note: It is highly recommended to use only the power adapter shipped with the IP Camera. Do NOT use any other power adapter and avoid possible damage to your new device. 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
8
4.
Hardware Installation
1.
Unpack your Edimax IP Camera from its packaging and ensure
that all the items listed in Chapter 1 are there.
2.
Connect the Edimax IP Camera to your network by attaching a
network cable from your switch or router to the LAN port on the
IP Camera.
3.
Connect the power adapter to the IP Camera and plug the
adapter into a power outlet. When the IP Camera is ready, the
Blue LED will light up.
Note:
It is highly recommended to use only the power adapter
shipped with the IP Camera. Do
NOT
use any other power adapter
and avoid possible damage to your new device.