Electrolux EFLW427UIW Wiring Diagram English - Page 2

2 Diagnostic Mode Tests MODE NUMBER (select models only) TEST NAME COMPONENTS UNDER TEST TEST CONDITIONS DISPLAYED FEEDBACK Lights, Buttons PODS® compartment (no test for 400 series) Wash compartment Bleach compartment Softener compartment Stain compartment Wash compartment Door unlock • LED indicators • LCD screen • Button response • Door lock • PODS® valve • Door lock • Hot valve • Door lock • Bleach valve • Door lock • Prewash valve • Bleach valve • Door lock • Prewash valve • Door lock • Cold valve • Drum light Valve stays on until water level reaches 20 liters. Then door remains locked for 5 minutes.* Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* Drum light turns on when door is open. Number of key pressed. Note: This number may not necessarily correspond to key number on table on page 1. Water level Water level Water level Water level Water level Water level Heater & motor • Pressure sensor • Cold valve • Motor • Heater • NTC • Door lock • Drum light Motor moves after machine fills with 60 mm of water. Heater heats until temperature reaches 70º C. Max. duration of test is 8 minutes. Need power meter to check heater functionality. NTC reading Recirculation Pump (no test on 400 series ) • Recirculation pump • Pressure sensor • Cold valve • Motor • Door lock • Drum light Motor moves after machine fills with 140 mm of water. Recirculation pump turns on. Max. duration of the test is 8 minutes. Display Concentrate wash pump (no test on 400 and 500 series) • Concentrate wash pump • Door lock • Drum light Concentrate wash pump turns on for max. 5 minutes. Need power meter to check concentrate wash pump functionality. Display Drain pump & spin • Drain pump • Motor • Door lock Drain pump turns on until empty, then motor starts spinning at max. rpm for 30 seconds. Then door remains locked for 6 minutes.* Display (drum speed/10) All valves on • Door lock • All valves Valve stays on until water level reaches 140 mm. Then door remains locked for 5 minutes.* water level Error history • The last 3 errors in memory Errors are displayed in order of history (most recent first). Note: Pressing temp + select (set) buttons together clears error history. precedes the 2 character alarm code, alternating through the alarms * Note for diagnostic mode only: The door is locked in the spin test step, however it can unlock without delay in another test step or on exiting diagnostic mode, when opening the door the drum can have energy as it spins down.