Electrolux EI30EW45KW Complete Owner's Guide (English) - Page 21

Setting Your Preferences 21 Setting continuous bake or 12 hour energy saving The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. Changing between 12 hour energy saving and continuous bake 1. Press USER PREF until you get to the E S menu page. 2. Press LO or HI to toggle the energy saving setting on and off. 3. Press START to accept the changes and go back to user preferences menu display. 4. Press CANCEL when finished to get back to the standard oven display. Audio control The Audio Control feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the default sounds and beeps. The volume of the beeps can also be adjusted. Adjusting oven temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. Each oven can be individually adjusted. To adjust the oven temperature 1. Press USER PREFERENCES until you get to the UPO menu page. 2. If you want to adjust the temperature in the lower oven, press USER PREFERENCES again. UPO will appear in the lower display. 3. Enter the temperature by pressing the LO or HI pads. The temperature can only be adjusted by ± 35°F. 4. Press START to accept the changes and go back to user preferences menu display. 5. Press CANCEL when finished to get back to the standard oven display. Re-setting to default factory settings To change the audio mode or audio volume 1. Press USER PREF until you get to the AUd menu page. 2. Press LO or HI to toggle between the available volume settings. AUd 5 for the highest volume setting to AUd 1 for the lowest volume. AUd OFF to disable the beeps. 3. Press START to accept the changes and go back to user preferences menu display. 4. Press CANCEL when finished to get back to the standard oven display. The oven control can be set to return to its original factory settings. This includes: Setting the Clock ON/OFF to ON, Setting the clock display mode to 12h, Display mode to Fahrenheit, Setting the oven temperature adjustment to zero, Setting audio level to 5 and Enabling the 12h energy saving mode. Reseting the control also erase the My Favorite recipes. To reset the oven control to its original settings 1. Press USER PREF until you get to the rSt no menu page. 2. Press LO or HI to select YES. 3. Press START to reset to default factory settings.