Electrolux EI30EW45KW Complete Owner's Guide (English) - Page 8

8 Control pad functions 20 UPPER OVEN 20 LOWER OVEN 21 user pref 22 timer on-off 22 timer on-off 23 24 CANCEL START 1 4 7 26 lo 25 23 56 89 27 + 0 hi 20. Oven Pad- Used to select the upper oven or the lower oven. 21. User Preference Pad- Used to bring the user preference menu in the display. 22. Timer on-off Pad- Used to set or cancel the minute timer. The minute timer does not start or stop cooking. 23. Cancel Pad- Used to cancel any functions previously entered except the time of day and the minute timer. Push Cancel Pad to stop cooking. 24. Start Pad- Used to start all oven functions. 25. 0 thru 9 Number Pads- Used to enter temperature and times. 26. - lo Pad- Used to lower the temperature and times. 27. + hi Pad- Used to raise the temperature and times. Getting Started Setting clock at power up Temperature visual display When the unit is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash with "CLO 12:00". The clock cannot be set when the oven is on. If an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid time of day. To set the clock (example for 1:30) 1. Press 1 3 0 pads to set the time of day to 1:30. The pads HI or LO can also be pressed to raise or lower the actual time displayed. 2. Press START to accept the changes or CANCEL to start with a time of 12:00. Your oven is equipped with a temperature visual display for each oven. When a cooking mode is set, the actual temperature will be shown in the display and will rise as the unit preheats. When the unit has reached its target temperature, a chime will sound to remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake and convection roast. The cooking modes which does not feature the temperature visual display will be noted in their descriptions. NOTE: The lowest temperature that can be displayed is 100°F.