Electrolux EIDW5705PS Complete Owner's Guide (English) - Page 16
Glassware / Flatware, Spotted Or Cloudy, Dishware Stained Or, Discolored, Etching, Detergent Left
View all Electrolux EIDW5705PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Solutions to Common Problems GLASSWARE / FLATWARE DISHWARE STAINED OR SPOTTED OR CLOUDY DISCOLORED • Check water hardness. For extremely hard water, it may be necessary to install a water softener. (See Detergent Usage Guide) • Water temperature may be low. Avoid extremely low or high temperatures. (See Factors Affecting Performance) • Avoid overloading and improper loading. (See Preparing and Loading Dishes) • Use fresh detergent. Old detergent is ineffective. • Make sure rinse aid dispenser is filled. • Check to see that proper amount of detergent is being used for cycle selected. (See Detergent Dispenser) • Home water pressure may be too low-it should be 20 to 90 pounds per square inch (psi). • Tea and coffee can stain cups. Remove the stains by hand washing in a solution of 1/2 cup (120 ml) bleach and one quart (1 L) of warm water. Rinse thoroughly. • Iron deposits in water can cause a yellow or brown film. A water filter installed in-line with your water supply will correct this problem. • Aluminum utensils can leave gray/black marks when they rub against other items. Load properly. • Certain high acid foods can cause discoloration of stainless steel and plastics if allowed to sit for a long period. Use the Rinse cycle or rinse by hand if not operating dishwasher at once. • Mixing stainless steel and silver utensils in silverware basket can cause pitting on the stainless steel utensils. Avoid mixing stainless steel and silver. ETCHING • Using too much detergent in soft or softened water causes this film that cannot be removed. • Adjust the amount of detergent based on the water hardness. (Check Detergent Usage Guide) • Lower the water temperature. DETERGENT LEFT IN DISPENSER CUP • Detergent may be old. Discard and use fresh detergent. • Be sure water action can reach the dispenser make sure spray arm is not blocked. • Check to see if cycle has been completed. • Make sure items do not prevent the detergent dispenser from opening. • Make sure the upper rack is firmly engaged to the nozzle on the back of the tub before closing the door.