Electrolux EIDW6105GS Complete Owner's Guide (English) - Page 14

Rinse Aid - dishwashers problems

Page 14 highlights

14 Dishwasher Dispenser & Detergents RINSE AID Rinse aid greatly improves drying and reduces water spots and filming. It causes the water to "sheet" off of dishes rather than form water droplets that cling and leave spots. The rinse aid dispenser, located next to the detergent cup, automatically releases a measured amount of rinse aid during the last rinse. If spotting and poor drying are problems, increase the amount of rinse aid dispensed by rotating the dial to a higher number. The dial is located under the dispenser cap. If the rinse aid is low, LOW RINSE displays at the beginning and end of the cycle on the EIDW6305 model. If the rinse aid is low, the LOW RINSE LED is illuminated at the beginning and end of the cycle on the EIDW6105 model indicating that it is time to refill. To add liquid rinse aid: 1 Turn dispenser cap 1/4 turn counterclockwise and lift out. 2 Pour in rinse aid until liquid reaches the flat surface marked MAX in the Rinse Aid dispenser. Do not overfill since this can cause oversudsing. 3 Replace cap. 4 Wipe up any spills with a damp cloth. The dispenser holds enough for 35 to 140 washes, depending on setting.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

14
Dishwasher Dispenser & Detergents
RINSE AID
Rinse aid greatly improves drying and reduces
water spots and filming.
It causes the water to
“sheet” off of dishes rather than form water
droplets that cling and leave spots.
The rinse aid dispenser, located next to the
detergent cup, automatically releases a measured
amount of rinse aid during the last rinse. If spotting
and poor drying are problems, increase the amount
of rinse aid dispensed by rotating the dial to a
higher number. The dial is located under the
dispenser cap.
If the rinse aid is low, LOW RINSE displays at the
beginning and end of the cycle on the EIDW6305
model.
If the rinse aid is low, the LOW RINSE LED
is illuminated at the beginning and end of the cycle
on the EIDW6105 model indicating that it is time to
refill.
To add liquid rinse aid:
1
Turn dispenser cap 1/4 turn counterclockwise
and lift out.
2
Pour in rinse aid until liquid reaches the flat
surface marked MAX in the Rinse Aid
dispenser. Do not overfill since this can
cause oversudsing.
3
Replace cap.
4
Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes,
depending on setting.