Electrolux ELFW7537AT Complete Owners Guide English - Page 9
PRE-INSTALLATION REQUIREMENTS, Installation in a recess or, closet, Clearance requirements, IMPORTANT
View all Electrolux ELFW7537AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PRE-INSTALLATION REQUIREMENTS 9 96" (244 cm) max. 24" (61 cm) min. 60 sq. Inches NOTE Drain hose length is 59 in. (150 cm). For installations requiring a longer drain hose, use hose P/N 137098000, available from an authorized parts distributor. 120 sq. Inches Equally Divided Split Vent Door Clearance requirements IMPORTANT DO NOT INSTALL YOUR WASHER: 1. In an area exposed to dripping water or outside weather conditions. 2. In an area where gasoline or other flammables are kept or stored. 3. On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.5 cm). To minimize vibration or movement, reinforcement of the floor may be necessary. 4. On top of another washer or on top of a dryer. Do not stack a dryer on top of washer already installed on pedestal. Installation in a recess or closet If washer and dryer are installed in the same closet, door ventilation is required: A minimum of 120 square inches (774.2 cm²) of opening, equally divided at the top and bottom of the door, is required. Louvered openings should be located 3 inches (7.6 cm) from bottom and top of door. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. 120 sq. Inches Solid Door with Wall Ventilation