Epson 2180 User Manual - Page 76

c Caution t Never use the knob to remove slack in the paper or to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position. 2 t Always remove any slack from the paper; otherwise print quality may be reduced. 9. Attach the paper guide. Then slide the edge guides to the middle of the paper guide. 10. Attach the printer cover and close the paper guide cover. Note: Always close the printer cover before printing. The printer does not print when the cover is open. 11. You may need to check and change the printer driver settings as described in Chapter 4. Send a print job to the printer. The printer starts printing from the current position without advancing the paper. The printed pages are fed over the paper guide toward the back of the printer. 12. After you finish printing, open the paper guide cover; then tear off the printed document at the perforation nearest the paper exit slot. To remove the paper from the tractors, follow the steps under "Removing paper from the pull tractor" on page 2-29. Printing on Continuous Paper 2-31