Epson 680Pro Product Information Guide - Page 4
EPSON LQ-680Pro, Point glue and/or paper staples on both sides - lq paper out
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
EPSON LQ-680Pro Single-sheet multipart forms: front and high-capacity cut-sheet feeder entry Width Front 3.5 to 12 inches (90 to 304.8 mm) High-capacity cut-sheet feeder 3.9 to 11.7 inches (100 to 297 mm) Length Front, top glue 2.8 to 16.5 inches (70 to 420 mm) Front, side glue 2.8 to 11.7 inches (70 to 297 mm) High capacity cut-sheet feeder 2.8 to 16.5 inches (70 to 420 mm) Copies 1 original + up to 5 copies Thickness 0.0047 to 0.018 inch (0.12 to 0.46 mm) Weight 10 to 15 lb (40 to 58 g/m2) Binding Front Line glue at the top or side of form High-capacity cut-sheet feeder Line glue at the top of form Envelopes: front and high-capacity cut-sheet feeder entry Size No. 6 6.5 × 3.6 inches (165 × 92 mm) No. 10 9.5 × 4.1 inches (241 × 105 mm) Thickness 0.0063 to 0.0205 inch (0.16 to 0.52 mm) Weight 12 to 24 lb (45 to 90 g/m2) Postcards: front and high-capacity cut-sheet feeder entry Width 3.9 to 7.8 inches (100 to 200 mm) Length 3.9 to 7.8 inches (100 to 200 mm) Thickness 0.0087 inch (0.22 mm) Weight 51 lb (192 g/m2) Roll paper: rear entry with optional roll paper holder Width 8.5 ± 0.12 inches (216 ± 3 mm) Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Weight 14 to 22 lb (52 to 82 g/m²) Continuous paper (standard and multipart): rear entry Width 4 to 12 inches (101.6 to 304.8 mm) Length 3 to 22 inches (76.2 to 558.8 mm) Copies 1 original + up to 5 copies Thickness Printable area 0.0025 to 0.018 inch (0.065 to 0.46 mm) Perforated edges up to 0.035 inch (0.9 mm) Weight (not multipart) 14 to 34 lb (52 to 128 g/m2) Weight (1 multipart sheet) 10 to 15 lb (40 to 58 g/m2) Binding Point glue and/or paper staples on both sides t The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1. t The thickness of the perforation part when extended should be 2 mm or less. t The perforation between pages should not extend all the way to the edges of the paper. Uncut length on the edges should be 1 mm or more. t When the horizontal and vertical perforation cuts intersect, do not print in between .12 inch (3 mm) above and below the horizontal perforation and in between 1.1 inch (28 mm) left and right of the vertical perforation. Continuous paper with overlapping multipart forms: rear entry Width and length of the backing sheet Same as standard continuous paper Copies 1 original + up to 5 copies Thickness Printable area 0.0025 to 0.018 inch (0.065 to 0.46 mm) Overlapping area up to 0.028 inch (0.70 mm) Labels: rear entry Label size 15/16 × 2.5 inches (23.8 × 63.5 mm) minimum 0.1 inch (2.5 mm) corner radius, minimum Backing sheet width 4 to 12 inches (101.6 to 304.8 mm) Backing sheet length (one page) 3 to 22 inches (76.2 to 558.8 mm) Backing sheet thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Total thickness 0.0063 to 0.0075 inch (0.16 to 0.19 mm) Label weight 17 lb (64 g/m²) 4 - EPSON LQ-680Pro 11/00