Epson ActionPrinter 3250 Product Information Guide - Page 2
ActionPrinter - manual
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ActionPrinter 3250 Single sheets (Manual insertion): Width 148 to 257 mm (5.8 to 10.1 inches) 92 lo 364 mm (3.6 to 14.3 inches) Thickness weight 0.065 to 0.14 mm (0.0026 to 0.0055 inches) 52 to 90 g/m2 (14 to 24 lb) Continuous paper: Width Copies Thickness Weight 101 to 254 mm (4 to 10 inches) Two sheets (one original plus one copy) 0.065 to 0.18 mm (0.0026 to 0.007l inches) total 52 to 82g/m2 (14 to 22 lb) for one sheet 40 to 58g/m2 (12 to 15 lb) per sheet in multi-part forms l Use only two-part carbonless multi-part forms and use them only with the optional push tractor. Note: You can use recycled paper under normal conditions. If you notice increases in ribbon consumption and paper jamming, use a higher grade of paper. Labels: Size Thickness Weight Envelopes: Size No.6 No. 10 Thickness 101 to 254 mm (4 to 10 inches) width for backing sheet 63.5 x 23.8 mm (2 1/2 x 1 5/16 inches) minimum for a label 0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing sheet 0.16 to 0.19 mm (0.0063 to 0.0075 inches) total 68 g/m2 (17 lb) l Use continuous type labels only with the optional push tractor. l Use labels onIy under normal temperature and humidity conditions. 166 x 92 mm (6.5 x 3.6 inches) 240 x 104 mm (9.4 x 4.1 inches) 0.16 to 0.48 mm (0.0063 to 0.0197 inches) 45 to 75g/m2 (12 to 20 lb) l Use envelopes only under normaI temperature and humidity conditions. l Load enveIopes with the longer side inserted into the rear slot by manual insertion only. Printable area: Single sheets (paper cassette and manual insertion) and envelopes A printable area A The minimum lop margin is 8.5 mm (0.33 inches). B The minimum left margin is 3 mm (0.12 inches). The minimum right margin is: 3.8 mm (0.15 inches) for the A4-size paper cassette 9.7 mm (0.38 inches) for the letter-size paper cassette 3 mm (0.12 inches) for manual insertion However, the maximum printable width is 203 mm (8 inches). C The minimum bottom margin is 13.5 mm (0.53 inches). Continuous paper A The minimum top and bottom margins above and below the perforation are 9 mm (0.35 inches). B The minimum left and right margins am 13 mm (0.51 inches). The maximum printable width is 203 mm (6 inches). Mechanical Paper-feed methods: MTBF: Print head life: Dimensions and weight: Friction (paper cassette and manual insertion) Push tractor (optional) Black ribbon cartridge S015032 Life expectancy : 2 million character at 48 dots/character 4000 power-on hours (10% duty) 100 million strokes/wire Height Width Depth Weight 130 mm (5.1 inches) 375 mm (14.8 inches) 252 mm (9.9 inches) 4.5 kg (10 lb) Electrical 120 V model: BInaptuetd vvoollttaaggee: range Rated frequency range: RInaptuetdfcreuqrrueenntc:y range: Power consumption: Dielectric strength: AC l20 V AC 103.5 to 132 V 50 to 60Hz 49.5 to 60.5 Hz 1.1 A 30 W (during self-test printing in draft mode at 10 cpi) AC 1 kV rms, 1 second (betwem AC line and chassis) 220-230 V model: Rated voltage: Input voltage range: Rated frequency range: W~Wvw Power consumption: Dielectric strength: AC220-230V AC 198 to 244 V 50 to 60 Hz 49.5 to 60.5 Hz 0.6 A 30 W (during self-test printing in draft mode at 10 cpi) AC 1.5 kV rms, 1 second (between AC line and 240 v model: Rated voltage: Input voltage range: Rated frequency range: Input frequency range: Rated current: Power consumption: AC 240V AC 216 to 264V 50 to 60 Hz 49.5 to 60.5 Hz 0.6 A 30 W (during self-test printing in draft mode at Dielectric strength: AP-3250-2 3/17/92 24-Pin Printers