Epson ActionPrinter 3250 Product Information Guide - Page 3
PC 437 USA, standard Europe
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Environmental Temperature Operation: Storage: 5 to 35°C (41 to 95°F) -20 to 55°C (4 to 131°F) Humidity (without condensation): Operation: 30 to 80% RH storage: 5 to 85% RH Safety approvals Safety Standards: US model: European model: UL1950 with D3, CSA22.2 #220 EN 60950 (TUV), IEC 950 (SEMKO, DEMKO, NEMKO, SETI) RFI: US model: FCC class B European model: VDE0871, CISPR PUB.22 Interface specifications Your printer is equipped with an 8-bit parallel interface with the following characteristics: Data format: 8-bit parallel Synchronization: Handshake timing: Signal level: Connector: STROBE pulse BUSY and ACKNLG signals TTL compatible 36-pin 57-30360 Amphenol connector or equivalent Default settings ActionPrinter 3250 Character Tables These character tables are selected with the default-setting mode or by wing a software command. AU the tables are the same for hex codes 00 through 7F. Therefore, only first table is shown completely. The rest of the tables show only the characters for hex codes 80 through FF. For all character tables except the italic character table, the ESC 6 and ESC 7 software commands let you select whether hex codes 80 to 9F are characters (EX 6) or control codes (ESC 7). PC 437 (USA, standard Europe) Item Top of farm position Page length Left and right margins Line spacing Character size Horizontal tab positions Font selection Special printing effects Download character set Default setting Current paper position or setting in the default setting mode. Single sheets: 65 lines for A4-size paper, 61 lines for letter-size paper, 22 inches for manual insertion Continuous paper: Subject to control panel setting in the default-setting mode Canceled 1/6-inch tine spacing 10.5 point Every eight characters Last font selected on control panel Canceled (except condensed printing) Hardware initialization: cleared Software initialization: deselected only In addition, hardware initialization clears the data buffer. Character available with ESC (^ To print the characters in the table below, you must first send the ESC (^ command. 24-Pin Printers 3/17/92 AP-3250-3