Epson ActionPrinter 3250 Product Information Guide - Page 7
Switching Between Continuous, and Single
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Tips for using continuous paper l You can adjust the top-of-form position temporarily. Open the printer cover and turn the gear marked by + and - signs to adjust the position This adjustment is lost when you turn off the printer or feed the paper backward to the paper-park position by pressing the FORM FEED and FONT buttons at the same time. 4. Replace the paper guide. ActionPrinter 3250 l If you want to change the top-of-form position permanently, adjust it with the default-setting mode. l Each time you turn on the printer with paper loaded, it reverses the continuous paper to the paper-park position and then advances it to the next top-of-form. Always remove your printed sheets before you turn off the printer to keep the top-of-form position accurate. Removing the push tractor 1. Tear off any printed pages. Press the FORM FEED and FONT buttons at the same time to feed the remaining paper backward to the paper-park position Remove the paper from the push tractor. CAUTION: Always tear off the printed document and excess paper before feeding paper backward. Never feed more than one page backward through the printer. 2. Turn off the printer. 3. Lower the paper-release lever to the single sheet position. Then pull the push tractor straight down and out of the printer. Switching Between Continuous Paper and Single When you use the push tractor, you can easily switch to single-sheet printing without removing the continuous paper supply. Switching to single sheets Here's how to switch from continuous paper to single sheets: 1. If you have a printed document stilI in the printer, tear off the printed pages and then press the FORM FEED and FONT buttons at the same time to reverse the remaining paper back to the paperpark position. CD CAUTION: l Always tear off printed pages before feeding paper backward; feeding too many sheets backward can cause a paper jam. l Never feed labels backward. They can easily peel off of their backing and jam the printer. 2. Lower the paper-release lever to the single-sheet position. 24-Pin Printers 3/17/92 AP-3250-7