Epson BrightLink 695Wi Users Guide - Page 120
Adjusting Color Uniformity, Projector ID, Parent topic, Related references, Color Mode, Dynamic
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Note: • You must set the remote control ID to match the projector ID each time you turn on the projector you have set it to control. • When you select 0 on the remote control, you can operate all projectors regardless of the Projector ID setting. • If you turn off the Projector ID setting, the remote control will operate the projector regardless of the ID selected on the remote. Parent topic: Using Multiple Projectors Related references Projector Setup Settings - Extended Menu Adjusting Color Uniformity If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each projector. Note: • The color tone may not be uniform even after performing color uniformity. • You cannot adjust color uniformity when the Color Mode setting is set to Dynamic. • Color Uniformity is disabled in the built-in whiteboard mode. 1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter. 120