Epson BrightLink 710Ui Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 5
Package Contents, Specifications, Connecting Devices, Positioning the Projector, Adjusting the Image
View all Epson BrightLink 710Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English 1 Package Contents 7 2 Specifications 8 3 Connecting Devices 11 4 Positioning the Projector 13 Installation worksheet for projecting on a pre-installed wall-mounted board 14 Installation worksheet for projecting on a plain wall 15 Projection distance worksheets 16 Diagonal image size and mounting position 17 Distance from top of projected image to wall plate 18 Installation measurement tables 18 Measurements in Inches for WUXGA Projectors in Native Resolution 19 Measurements in Centimeters for WUXGA Projectors in Native Resolution 21 5 Installing the Projector 23 Assemble the parts 23 Install the wall plate on the wall 25 Determine the projection distance and pull out the mount arm slider 27 Route the cables through the wall mount arm 28 Attach the mount arm to the wall plate 28 Adjust the vertical slide position of the arm 30 Attach the projector to the wall mount 31 Connect the power cord and other cables to the projector 32 6 Adjusting the Image 33 Turn on the projector 33 Change the aspect ratio if necessary 34 Display the test pattern 34 Adjust the focus 35 Use the adjustment dial on the left side to adjust the horizontal roll 36 Use the adjustment knob on the right side to adjust the horizontal rotation 36 Use the adjustment dial on the top to adjust the vertical tilt 37 Adjust the horizontal slide 37 Adjust the forward/backward slide 38 Adjust the vertical slide 38 Re-adjust the focus 39 Turn off the display of the test pattern 39 5