Epson P6000 Product Support Bulletin(s) - Page 16
select the Firmware Version menu. Press OK.
UPC - 010343866812
View all Epson P6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
• AC adapter - must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed Firmware Update Procedure: Download the file epson12870.exe for Windows users or epson12871.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. To verify the current firmware version on your viewer, power on the unit, select Settings from the Home screen and press OK. Then select Device Information and use the 4 way ring to select the Firmware Version menu. Press OK. If you see an earlier version such as: 01.29.6838-0108-0107-0112 (P-6000) or 01.29.6838-0108-0107-0112 (P-7000) then proceed to the next section. Steps: 1. Install a blank memory card into a memory card reader/writer and copy the "PSV5FIRM" folder (including all the files in the folder) to the root directory of the memory card. 2. Verify that the battery is installed in the P-6000 or P-7000 viewer. 3. Connect the AC adapter to the viewer, but do not power it on. 4. After the firmware file has been copied to the memory card, insert the CompactFlash or SD memory card into the viewer. 5. Press and hold down the "OK" and keys while sliding the "POWER" switch as shown below. When you see the firmware update screen (see reference image below), release the OK and keys. Note: If you do not see this screen, power off the unit and start the firmware process again. Page 2 of 3 PSB.2009.01.001