Epson PowerLite Home Cinema 2040 User Manual - Page 125
Power light, Status light, Lamp light, Status and solution, High Altitude
View all Epson PowerLite Home Cinema 2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Power light Off Off Off Any Any Status light Flashing blue Flashing blue Off Any Any Lamp light Temp light Orange Off Off Orange Off Off Any Any Any Any Status and solution Lamp has a problem • Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Standby or sleep mode with communication Off Wireless LAN light is solid blue; Wireless LAN is available Wireless LAN light flashes blue quickly; connecting to a device 125